This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives.
Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com's Lifetime Warranty and free lifetime technical support.
Warranty Information | |
---|---|
Warranty | Lifetime |
Hardware | |
Chipset ID | Marvell - 88SA8052 |
Performance | |
Maximum Data Transfer Rate | 133MB/sec |
Connector(s) | |
Connector Type(s) | 1 - IDE (40 Pin; EIDE/PATA) Male |
1 - SATA Data & Power Combo (7+15 pin) Receptacle | |
1 - SP4 (4 pin; Small Drive Power) Male | |
Special Notes / Requirements | |
System and Cable Requirements | An IDE controller and ATA cable (not included). |
Physical Characteristics | |
Product Height | 0.9 in [23 mm] |
Product Length | 3 in [75.5 mm] |
Product Weight | 0.5 oz [15 g] |
Product Width | 0.8 in [20 mm] |
Environmental | |
Humidity | 15~90% RH |
Operating Temperature | 5°C to 50°C (40°F to 122°F) |
Storage Temperature | -25°C to 80°C (-13°F to 176°F) |
Packaging Information | |
Shipping (Package) Weight | 0.2 lb [0.1 kg] |
What's in the Box | |
Included in Package | 1 - IDE to SATA adapter |
1 - LP4 Molex to SP4 Power Cable | |
1 - Instruction Manual |
* Product appearance and specifications are subject to change without notice.