• Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Connect the device to a network using a 10 or 100 BaseT connection

• Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

• Provides early-warning fault analysis on batteries enabling timely preventive maintenance 

• Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

• Supplies utility power to the connected loads in the event of a UPS power overload or fault.

• Allows additional run time to be quickly added as needed.

• Maximizes battery performance, life, and reliability through intelligent, precision charging.

• Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• Automatically starts up the connected equipment upon the return of utility power.

• Prolongs battery life by regulating the charge voltage according to battery temperature.

• Provides remote power management of the UPS over the network.

• Enables centralized management via the APC InfraStruXure Manager.

SmartSlot:

• Customize UPS capabilities with management cards.

LED status indicators:

• Quickly understand unit and power status with visual indicators.

• Provides management of the UPS via a serial port.

• Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

• Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

• Install maintenance releases of firmware remotely using FTP.

• Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

• Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Provides early-warning fault analysis ensuring proactive component replacement.

• Warns when a battery is not available to provide backup power.

• Provides notification of changing utility power and UPS power conditions

• Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

• Protects connected loads from surges, spikes, lightning, and other power disturbances.

• Minimizes installation costs by enabling the use of smaller generators and cabling.

• Ensures clean, uninterrupted power to protected equipment when generator power is used.

• Provides temporary battery power when the utility power is out.

• Easy recovery from overloads; no need to replace a fuse.

• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

• Output Power Capacity: 10 kW / 10 kVA
• Max Configurable Power: 10 kW / 10 kVA
• Nominal Ouput Voltage: 208V
• Output Voltage Distortion: Less than 3%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Crest Factor: 3 : 1
• Topology: Double Conversion Online
• Waveform Type: Sine Wave
• Output Connections: (1) Hard Wire 3-wire (2PH + G), (4) NEMA L6-20R, (2) NEMA L6-30R

Input

• Nominal Input Voltage: 208V
• Input Frequency: 45 - 65 Hz (auto sensing) 
• Input Connections: Hard Wire 3-wire (2PH + G)
• Input Voltage Range for Main Operations: 160 - 275V
• Input Voltage Adjustable Range for Mains Operation: 100 - 275V
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
• Typical Recharge Time¹ : 1.5 hour(s)
• RBC Quantity: 2

Communications & Management

• Interface Port(s): Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
• Available SmartSlot™ Interface Quantity: 1
• Control Panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays
• Emergency Power Off (EPO): Yes

Surge Protection & Filtering

• Surge Energy Rating: 480 Joules

Physical

• Maximum Height: 17.00 inches (432 mm)
• Maximum Width: 10.35 inches (263 mm)
• Maximum Depth: 28.15 inches (715 mm)
• Net Weight: 246.00 lbs. (111.58 kg)
• Color: Black

Conformance

• ENERGY STAR (USA), FCC Part 15 Class A, UL 1778
• 3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

• RoHS: Compliant
• REACH: Contains no SVCHCs