Premium power protection
The new APC Back-UPS Pro models provide premium battery backup and surge protection. Ideal for home or small office electronics, networking devices, gaming PCs and consoles. APC Back-UPS Pro models provide sinewave output, USB charging ports for your mobile devices, and increased runtime for your critical electronics.
Run time for loadW
3m
Max. Capacity Used
100%
Output power capacity
810Watts / 1.35kVA
Output Connections
(4) NEMA 5-15R (Surge Protection)
(6) NEMA 5-15R (Battery Backup)
Nominal Output Voltage
120V
Nominal Input Voltage
120V
Input Connections
NEMA 5-15P
Cord Length
6ft (1.83meters)
Maximum Input Current
12.0A
Back UPS PRO BR 1350VA, SineWave, 10 Outlets, 2 USB Charging Ports, AVR, LCD interface
High Performance Computer and Electronics UPS for Premium Power Protection
Includes: coaxial cable, USB cable, User Manual
Provides notification of changing utility power and UPS power conditions
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
This LED informs users of potentially dangerous wiring problems in the wall circuit.
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Provides protection of connected equipment from power surges on the data lines.
Reduces line noise that can cause data loss and keyboard errors.
Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
Specially designed for performance gaming equipment, this battery backup protects gaming PCs, consoles and accessories from damaging power surges, interruptions and outages.
This software supports numerous operating systems and processors. For further information, please
Certifies that electronic devices don't contain hazardous metals and flame retardants
Eliminates humming and heat generated when powering tube lights and fans
Simultaneously charge mobile devices, including smartphones and tablets.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Cold-start capable
Provides temporary battery power when the utility power is out.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Max Configurable Power (Watts)
810Watts / 1.35kVA
Output Frequency (sync to mains)
60Hz +/- 3 Hz
Topology
Line Interactive
Waveform type
Sine wave
Transfer Time
8ms typical : 10 ms maximum
Input frequency
60 Hz +/- 3 Hz
Input voltage range for main operations
88 - 147V
Number of Power Cords
1
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
1
Typical recharge time
16hour(s)
Expected Battery Life (years)
3 - 5
RBC Quantity
2
Battery Charge Power (Watts)
10Watts
Battery Volt-Amp-Hour Capacity
168
Interface Port(s)
USB
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm
Surge energy rating
1080Joules
Data Line Protection
RJ45 10/100/1000 Base-T Ethernet protection, Co-axial Video / Cable protection
Filtering
Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous
Maximum Height
10.24inches (260MM, 26.0CM)
Maximum Width
3.94inches (100MM, 10.0CM)
Maximum Depth
14.49inches (368MM, 36.8CM)
Net Weight
25.79lbs. (11.7KG)
Shipping weight
29.32lbs. (13.3KG)
Shipping Height
14.12inches (358MM, 35.87CM)
Shipping Width
8.78inches (223MM, 22.3CM)
Shipping Depth
18.98inches (482MM, 48.2CM)
Master Carton Units
1.0
Master Carton Weight
29.32lbs. (13.3)
Units per Pallet
16.0
SCC Codes
1073130433539 6
Operating Temperature
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95 (non-condensing) %
Operating Elevation
0-10000ft (0-3000meters)
Storage Temperature
-15 - 40 °C
Storage Relative Humidity
0 - 95 (non-condensing) %
Storage Elevation
0-10000ft (0-3000meters)
Audible noise at 1 meter from surface of unit
45.0dBA
Approvals
ENERGY STAR V2.0 (USA), FCC Part 15 Class B, NOM, TUV C-US certified
Equipment protection policy
Lifetime : $500000
Standard warranty
3 years repair or replace
RoHS
Compliant